中文字幕日韩欧美一区二区三区_欧洲一级毛片_亚洲国产精品视频_亚洲视频三区_龙珠z国语291集普通话_久久久精品456亚洲影院

1、 Lithium primary battery

（1） Lithium primary batteries with a capacity not exceeding (including) 10Ah

1. The safety performance should meet the requirements of GB8897.2-2005 "Primary batteries - Part 2: Dimensions and technical requirements" and GB8897.4-2008 "Primary batteries - Part 4: Safety requirements for lithium batteries"

2. Include in the management of Class C controlled components. When the rated capacity is ≤ 2.5Ah, a non explosion certificate issued by the lithium primary battery production enterprise needs to be submitted. When 2.5Ah<rated capacity ≤ 10Ah, a testing report issued by a national or ministerial level testing and inspection agency within 3 years needs to be submitted

3. Lithium primary batteries with high safety performance, such as lithium manganese dioxide primary batteries, should be selected. When the capacity of a single battery is greater than 5Ah, lithium thionyl chloride primary batteries should not be used

4. The technical manual and product manual of equipment using primary batteries should indicate the manufacturer and specifications, or the battery type, rated voltage, and rated capacity

5. When sealing a primary battery with a pressure relief valve, an exhaust port should be reserved at the pressure relief valve

6. When the battery pack supplies power, the type, specifications, and technical parameters of the individual batteries should be consistent and produced by the same manufacturer.

7. Lithium ion batteries used in intrinsically safe and sealed equipment should not only meet the relevant requirements of GB3836.1-2010, GB3836.4-2010, or GB3836.9-2006, but also:

A、 The total energy should not exceed 100Wh

B、 The battery should be placed in a separate battery compartment, and sealing equipment is not required

C、 When equipped with single battery over discharge voltage protection, discharge over-current protection, output short circuit and anti charging protection functions

8. The lithium primary battery used in explosion-proof electrical equipment should not only meet the relevant requirements of GB3836.1-2010 GB3836.2-2010, but also meet the following requirements:

A、 The lithium primary battery in explosion-proof equipment should have an independent battery compartment, and the protection circuit should be placed outside the compartment. When the rated energy of the battery pack is greater than 200Wh, the battery compartment should be an independent explosion-proof chamber and able to withstand a 1.5MPa water pressure test

B、 The battery management system should have the function of detecting parameters such as voltage of individual batteries, voltage and current of battery packs, etc

C、 It should have the functions of over discharge voltage, discharge current, and output short circuit protection for individual batteries and battery packs

（2） Lithium primary batteries with a capacity exceeding 10Ah

1. Include in safety sign management

2. Should comply with the Implementation Rules for the Review and Issuance of Safety Signs for Mining Products - Mining Lithium Batteries

3. The technical manual and product manual of equipment using primary batteries should indicate the manufacturer and specifications, or the battery type, rated voltage, and rated capacity

4. When sealing a primary battery with a pressure relief valve, an exhaust port should be reserved at the pressure relief valve

5. When the battery pack supplies power, the type, specifications, and technical parameters of the individual batteries should be consistent and produced by the same manufacturer.

6. Lithium primary batteries used in explosion-proof electrical equipment should not only meet the relevant requirements of GB3836.1-2010 and GB3836.2-2010, but also comply with the relevant requirements of the "Implementation Rules for the Review and Issuance of Safety Signs for Mining Products - Power Products"

2、 Aqueous electrolyte primary battery

1. The safety performance should meet the requirements of GB8897.2-2005 "Primary batteries - Part 2: Dimensions and technical requirements" and GB8897.5-2006 "Primary batteries - Part 5: Safety requirements for aqueous electrolyte primary batteries"

2. Include in the management of Class C controlled components

3. Equipment using primary batteries, their technical manuals, and product manuals should indicate the manufacturer and specifications, or the battery type, rated voltage, and rated capacity

4. When sealing a primary battery with a pressure relief valve, an exhaust port should be reserved at the pressure relief valve

5. When the battery pack supplies power, the type, specifications, and technical parameters of the individual batteries should be consistent and produced by the same manufacturer.

6. Electrical equipment using aqueous electrolyte primary batteries should not only meet the relevant requirements of GB3836.1-2010, GB3836.2-2010, GB3836.4-2010, or GB3836.9-2006, but also comply with:

A、 Should be placed in a separate battery compartment

B、 Equipped with protective circuits to prevent charging and short circuits

Service Hotline: 18924609560 (same WeChat account)